CHIP RESISTORS
Chip Resistor, Chip Array, Networks
| FCR, RCA, RCN
Token china precision surface mountable Flat Chip Resistors (FCR), SMD Resistor Chip Array (RCA), and Resistor Chip Networks (RCN) serves as a high-accuracy, cost-effective replacement for through-hole resistors enabling total solder reflow board assembly, and eliminating the need for lead forming and lead trimming in the manufacturing process. SMD products meet RoHS compliant and extend a complete line to both military and commercial applications. Features
Applications
|
Dimensions (Unit: mm) - Flat Chip Resistor FCR
![]() |
| Dimensions Type |
L | W | H | L1 | L2 |
| FCR 03 (0603) | 1.60 ± 0.10 | 0.80 ± 0.10 | 0.45 ± 0.10 | 0.30 ± 0.20 | 0.30 ± 0.20 |
| FCR 05 (0805) | 2.00 ± 0.15 | 1.25 ± 0.15 | 0.50 ± 0.10 | 0.40 ± 0.20 | 0.35 ± 0.15 |
| FCR 06 (1206) | 3.10 ± 0.15 | 1.55 ± 0.15 | 0.55 ± 0.10 | 0.50 ± 0.25 | 0.50 ± 0.25 |
Dimensions (Unit: mm) - Resistor Chip Array RCA
![]() |
![]() |
| Dimensions Type |
L | W | H | L1 | L2 | P | Q |
| RCA03-4D (0603) |
3.2±0.2 | 1.6±0.15 | 0.5±0.1 | 0.30±0.15 | 0.35Max | 0.8±0.1 | 0.5±0.1 |
Dimensions (Unit: mm) - Resistor Chip Network RCN
![]() |
![]() |
| Dimensions Type |
L | W | H | L1 | L2 | P | Q |
| RCN06-10R RCN06-10S |
6.4 ± 0.2 | 3.1 ± 0.2 | 0.55 ± 0.1 | 0.5 ± 0.3 | 0.5 ± 0.2 | 1.27 ± 0.1 | 0.8 ± 0.2 |
Characteristic - Flat Chip Resistor FCR
| Type | Power Rating at 70°C |
Max. RCWV |
Max. Overload Voltage |
Resistance Tolerance(%) |
Resistance Range (Ω) | Standard Resistance Values |
|
| Min. | Max. | ||||||
| FCR03 | 1/10W | 50V | 100V | ± 1% (F) ± 5% (J) |
10Ω 1Ω |
1MΩ 10MΩ |
E-96 E-24 |
| FCR05 | 1/8W | 150V | 300V | ± 1% (F) ± 5% (J) |
10Ω 1Ω |
1MΩ 10MΩ |
E-96 E-24 |
| FCR06 | 1/4W | 200V | 300V | ± 1% (F) ± 5% (J) |
10Ω 1Ω |
1MΩ 10MΩ |
E-96 E-24 |
Characteristic - Resistor Chip Array RCA
| Type | Rated Power at70°C |
Max. Working Voltage |
Max. Overload Voltage |
T.C.R. (ppm/°C) |
Resistance Range | Jumper Rated Current |
Jumper Resistance Value |
Operating Temperature Range |
|
| F(±1%) E-96 |
G(±2%) J(±5%) E-24 |
||||||||
| RCA03-4D (0603) |
0.063 | 50V | 100V | ± 200 | 100Ω~470KΩ | 10Ω~1MΩ | 1A | 50mΩ MAX |
-55°C~+125°C |
Characteristic - Resistor Network RCN
| Type | Rated Power at70°C |
Max. Working Voltage |
Max. Overload Voltage |
T.C.R. (ppm/°C) |
Resistance Range | Number of Terminals |
Number of Elements |
Operating Temperature Range |
| J (±5%) E-12 | ||||||||
| RCN06-10R RCN06-10S |
1/16W | 50V | 100V | ±200 | 10Ω~1MΩ | 10 | 8 | -55°C~+125°C |
Chip Marking
![]() |
SMD Taping Packaging Dimensions (Unit: mm)
![]() |
| TYPE | A | B | W | F | E | P1 | P2 | P0 | D | G |
| FCR03 | 1.10±0.20 | 1.90±0.20 | 8.0±0.3 | 3.50±0.05 | 1.75±0.10 | 4.0±0.1 | 2.00±0.05 | 4.0±0.1 | 1.5±0.1 |
2.75 |
| FCR05 | 1.65±0.20 | 2.45±0.20 | 8.0±0.3 | 3.50±0.05 | 1.75±0.10 | 4.0±0.1 | 2.00±0.05 | 4.0±0.1 | 1.5±0.1 |
2.75 |
| FCR06 | 2.00±0.10 |
3.57±0.10 |
8.0±0.3 | 3.50±0.05 | 1.75±0.10 | 4.0±0.1 | 2.00±0.05 | 4.0±0.1 | 1.5±0.1 |
2.75 |
SMD Reel Package Dimensions (Unit: mm)
![]() |
| Symbol | Dimension |
| A | 178 ± 2.0 |
| N | 80.0 ± 0.5 |
| C | 13.0 ± 0.5 |
| D | 20min |
| B | 20 ± 0.5 |
| G | 100 ± 1.5 |
| T | 14.9 max. |
Environmental Characteristics - FCR, RCA, RCN
| ITEM | SPECIFICATION | TEST METHOD |
| DC Resistance | J: ±5%, F: ±1% | JIS C 5202 5.1 |
| Temperature Coefficient of Resistance(TCR) |
J: ±200ppm/°C F: ±100ppm/°C |
JIS C 5202 5.2 / IEC 115-1 4.8.4.2 Test temperature:25°C → -55°C |
| Short Time Overload | J:ΔR≤ ± (2%+0.1Ω) F:ΔR≤ ± (1%+0.05Ω) |
JIS C 5202 5.5 / IEC 115-1 4.13 2.5xRated voltage (Max. Overload Voltage) for 5 sec. measure resistance after 30 minutes |
| Resistance to Solder Heat |
J:ΔR≤ ± (1%+0.1Ω) F:ΔR≤ ± (0.5%+0.05Ω) No mechanical damage |
JIS C 5202 6.4 / IEC 115-1 4.18 With 260 ± 5 °C for 10 ± 1 sec. |
| Solderability | Over 95% of termination must becovered with solder |
JIS C 5202 7.4 / IEC 115-1 4.17 After immersing flux, dip in the 235 ± 5°C molten solder bath for 2 ± 0.5 sec. |
| Temperature Cycle | J:ΔR≤ ± (1%+0.1Ω) F:ΔR≤ ± (0.5%+0.05Ω) No mechanical damage |
JIS C 5202 7.4 / IEC 115-1 4.19 Repeat 5 cycles as follow -55°C(30minutes)+25°C(10~15minutes) +125°C(30minutes)+25°C(10~15minutes) |
| Terminal Strength | ΔR≤ ± (0.5%+0.05Ω) No mechanical damage |
JIS C 5202 6.1 500g for 10 seconds |
| Load Life | J:ΔR≤ ± (3%+0.1Ω) F:ΔR≤ ± (1%+0.05Ω) |
JIS C 5202 7.10 / IEC 115-1 4.25.1 Permanent resistance change after 1000+48/-0 hours (1.5 hours ON,0.5hour OFF) at RCWV or Max. Keep the element at 70 ± 3°Cambient |
| Load Life Humidity | J:ΔR≤ ± (3%+0.1Ω) F:ΔR≤ ± (1%+0.05Ω) |
JIS C 5202 7.9 / IEC 115-1 4.24.2 Maintain the temperature of the element at 40 ± 2 °Cand 90~95% RH with the rated voltage applied. Cycle ON for 1.5hours and Off for 0.5hour for 1000+48/-0 hours. After one hour, measure the resistance value. |
| Intermittent Overload | ΔR≤ ± (5%+0.1Ω) No mechanical damage |
JIS C 5202 5.8 2.5xRated Voltage(Max.Overload Voltage), 1secON,25sec OFF, test 10,000 cycles |
How to Order - Flat Chip Resistor FCR
| FCR | 03 | 100 | J | TP | |||||||||||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||||||||||
How to Order - Resistor Chip Array RCA
| RCA | 03 | - | 4 | D | 101 | J | TP | |||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||
How to Order - Resistor Chip Network RCN
| RCN | 06 | - | 10 | R | 103 | J | TP | ||||||||||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||||||||||







