| 1 - 10 of about 20 for frequency range. |
Ceramic Filters - Token Passive Components
Frequency Range , Murata (P/N) , LT10.7M FOR FM RECEIVER , Dip , 10.7MHz , SFE 10.7 FM-IF , LT10.7M A10 FOR LOW LOSS TYPE , Dip , 10.7MHz , SFE 10.7 , LT10.7M FOR ... Frequency Range , Murata (P/N) , LT MB FOR TV/VCR STAGE , Dip , 4.5~6.5 MHz , SFE MB , LTS MCB/MDB LOW SPURIOUS FOR TV/VCR STAGE OF , Dip , 4.5~6.5 MHz , SFSH MCB/ ... ...
Ceramic Filters Ceramic Trap Ceramic Discriminator
Frequency Range , Murata (P/N) , Chip LTCS10.7M Series , Chip Ceramic Filter LTCS10.7M series (Compatible to Murata SFECS10M7) for FM-receivers are small, high ... Frequency Range , Murata (P/N) , TV/VCR Stage - LT MB Series , LT MB Series (Compatible to Murata Ceramic Filters SFE MB series) are a high selectivity filter for 2 ... ...
Ceramic Resonator
TOKEN offers two extending frequency range for ceramic resonators in MHz and KHz. , CERAMIC RESONATORS - Download Entire Ceramic Resonator Catalogue PDF file (481KB). , MHz Type Ceramic ... Frequency Range , Murata(P/N) , ZTA Series , ZTA (MHz) Ceramic Resonator series cover the frequency range of 1.79 MHz to 60.00 MHz with an initial frequency ... ...
TokenChina Passive Components - Products
regard to stability. Token offers two extending frequency range for ceramic resonators in MHz and kHz. , Ceramic Resonator Catalogue PDF - Ceramic Resonators. (481KB) , MHz) Resonator ZTA PDF - 1.79 MHz to 60.00 ...
SMD Inductors
hours in each direction of X,Y,Z on p-Board at a frequency range of 10-55-10HZ with 1.5mm amplitude , Dropping , Δ L/L shall be within ±3%. No evidence of damage , Dropping 1m over the ground of ...
Power Inductors Passive Components
hours in each direction of X,Y,Z on p-Board at a frequency range of 10-55-10Hz with 1.5mm amplitude. , Dropping , No evidence of damage , Dropping 1m over the ground of concrete or cement 10 times , Power ...
SMD Ceramic Resonator
without capacitor. These units are offered in the frequency range , from 1.79 MHz to 50.00 MHz with an initial frequency tolerance , of ±0.5%. , ZTTC series features a built-in load capacitance. This ...
Ceramic Resonator (MHz)
Ceramic ResonatorsZTA (MHz) series cover the frequency range of 1.79 , MHz to 60.00 MHz with an initial frequency tolerance fo±0.5%. Since the ZTA series utilizes the thickness mode of vibration , of ... Frequency Range(MHz) , Frequency Accuracy(at 25°C) (%) , Stability in Temperature(-20°C ~ +80°C) (%) , Operating Temperature(°C) , Aging ForTen Years ...
Ceramic Resonator (kHz)
frequency device in the frequency range of 190 kHz to 1,250 , kHz. Initial frequency tolerance is ± 0.5 % which compares , very favorably to the norminal ± 2% ~ ± 3% ... Frequency Range(kHz) , Wwidth , Tthickness , Hheight , Slead space , Llead length , 190~249 , 13.5 , 3.6 , 14.7 , 10.0 , 8.0 , 250~374 , 11.0 , 3.6 , 12.2 , 7.7 , 7. ...
Ceramic Resonators
device unit of ZTB with the frequency range of 375 kHz to 1,250 , kHz. Initial frequency tolerance is ± 0.5 % which compares , very favorably to the norminal ± 2% ~ ±3% ...