WIREWOUND, FUSIBLE, GENERAL PURPOSE RESISTORS

High Precision Wirewound Power Resistor

Designed to meet the exacting requirements of military specification MIL-R-93, low inductance, and they are RoHS compliant. Offering tolerances as accurate as ±0.001 and covering applications from precision to power.

Power Precision Wire-Wound Resistor

The new KNP-R series are high power size ratio and high performance. This device equates to Vishay wirewound CW Series for low cost has ultralow ohmic values for current sensing applications. An ultrahigh ohmic value and noninductive windings are available.

Wirewound Vitreous Enamel Coated Resistor

Advantage of these vitreous enamelled devices is a cost-competitive alternative that Ayrton-Perry windings can be used to give low-inductance resistors within the same package dimensions.

Power Wirewound Resistor

Tokenchina have the capability to manufacture noninductive (KNPN), fusible (FKN), or high pulse withstanding resistors, and custom wirewound capabilities extend beyond the usual fusible or noninductive offerings.

frequency applications. It is a cost-competitive alternative that Ayrton-Perry windings can be used to give low-inductance resistors.

Ceramic Cement Thermal Cut-offs Resistor

FKU/FRU Series is specially designed to detects the heat produced by excess current with sharp fusing characteristics, low cost and easy handling for one box type, space saving type, excellent anti-surge characteristics.

Metal Film Fusible Resistor

Precisely controlled resistance, stable and accurate designed for dual purpose that performs as a metal/carbon film resistor and also as a fuse. It is an ideal for power circuit overload protection.

Wirewound Fusing Resistor

FKN Series is nonflammable wirewound fusible designed to act as an ordinary power resistor under normal circuit conditions, and as a fuse under fault conditions or overload power circuit protection.

Cement Ceramic Housed Fuse Resistor

High temperature capability, is prefect for high voltage surge, load circuit protection, and large power dissipation in higher temperature environments. It is a low noise, low cost, precise fusing point and time log.

A perfect fit when electronic products have to be surge immune to ensure their continued reliable operation if subjected to realistic levels of surge voltages, and they are required to comply with safety requirements.

Carbon Composition Resistor

A perfect for vehicle ignition system at higher peak voltages. Also, these carbon composition devices are designed to meet the demands of high voltage power in medical and lighting applications.

Photoresistor (CDS), Light Dependent Resistor (LDR)

LDR, CDS cadmium sulfide cell, photoconductor, or photocell is a variable resistor specified for light-sensitive switching devices, security alarms, street lamps, and clock radios.

Precision Resistor

Precision metal film resistors offers tight tolerances, low-cost, and low TCRs over a wide resistance range and are suitable for precision applications where long-term stability is dominant.

Metal oxide resistor

The power type leaded resistors are utilized for both general (voltage divider, and pull-up/pull-down resistors) and surge (current limiting, overload ground line) applications in the automotive, industrial and consumer industries.

Cement Ceramic Housed Resistor

Ceramic housed cement filling based resistor, cored with metal oxide, wirewound, or thermal Cut-offs fuse is recommended for commercial applications requiring low cost. Axial, radial and vertical styles are available.

Carbon Film Resistor

Carbon resistor is the earliest and a still popular type made by breaking down hydrocarbon gases at high temperature in a vacuum to form a carbonic deposit on the surface of a cylindrical substrate.

Zero Ohm and Jumper Wire Resistor

ZO, JW Series: Zero Ohm and Jumper Wire Resistors are developed for the interconnection device Between points on a P.C. Board as jumper wires or Crossovers.