Resistors Resistor

	Resistors - General Purpose

Token utilizes the latest technology enabling the most cost-effective designs with low stand-alone temperature coefficient and resistance tolerance. Products Include single chip SMD, to more complex arrays and networks. Fixed linear technologies include fusible, anti-surge power, wirewound, metal film, metal oxide, carbon film, non-inductive wirewound, cement type, and thick film type.

Token also extends a complete line for both military and commercial applications.

Resistors General Purpose - Download Entire Resistor Catalogue PDF file (819KB).

Description	Type	Wattage
Resistor with Thermal Cut-offs - FKU, FRU Series FKU, FRU Series Cement Resistor with Thermal Cut-offs is specially sharp fusing characteristics, low cost and easy handling for one box type, space saving type, excellent anti-surge characteristics. FKU, FRU Series - PDF (107KB)	Dip	0.8 ~ 3.5 W
Photo Resistors / Light Dependent Resistors - PGM Series Photo Resistor (CDS), Light Dependent Resistors (LDR) - PGM Series are thin film devices which resistance changes with change of the light source. PGM Series - PDF (400KB)	Dip	90 ~ 500 mW
Wirewound Resistors - BWW Series High precision axial moulded wirewound resistors - BWW Series, high reliability, excellent load life stability. Meets the Standards of MIL-R-93. BWW Series - PDF (294KB)	Dip	1/2 ~ 10 W
Wirewound Resistors - KNP-VE Series Vitreous enamel coated wirewound resistors - KNP-VE Series, The element assembly is then protected by a coating or enclosure of vitreous enamel. KNP-VE Series - PDF (297KB)	Dip	2.5 ~ 12 W
Metal Film Fusible Resistors - FRN Series Nonflammable Metal Film Fusible Resistors are designed to act as an ordinary resistor under normal circuit conditions, and as a fuse under fault conditions. FRN Series - PDF (330KB)	Dip	1/4 ~ 3 W
Wirewound Fusible Resistors - FKN Series Nonflammable FKN Wirewound Fusible Resistors are designed to act as an ordinary resistor under normal circuit conditions, and as a fuse under fault conditions. FKN Series - PDF (330KB)	Dip	1 ~ 6 W
Cement Fusible Resistors - FSQ Series Nonflammable FSQ Fusible Cement Resistors are designed to act as an ordinary resistor under normal circuit conditions, and as a fuse under fault conditions. FSQ Series - PDF (330KB)	Dip	2 ~ 10 W
Wirewound Resistors - KNP Series KNP/KNPN is wirewound resistor and typically used where large power dissipation is required and where AC performance is relatively unimportant. KNP Series - PDF (319KB)	Dip	1/2 ~ 12.5 W
Anti Surge Resistors - RCR Series Metal Glaze RCR Anti Surge Power Resistors are made by metal glaze coating on the surface of a cylindrical substrate with excellent characteristics and stable at even high resistance range. RCR Series - PDF (334KB)	Dip	1/2 ~ 1 W
Carbon Composition Resistors - CCR Series Carbon Composition Resistors are excellent characteristic against high voltage surge current. Higher reliability for disconnection failure comparing to wirewound resistors and film resistors. CCR Series - PDF (329KB)	Dip	1/2 ~ 1/4 W
Wirewound Non-Inductive Resistors - KNPN Series KNPN Wirewound Non-Inductive Resistors are typically used where large power dissipation is required and where AC performance is relatively unimportant. KNPN Series - PDF (319KB)	Dip	1/2 ~ 6 W
Precision Resistors - MF Series Precision Resistors include axial through-hole and metal film fusible for special purpose. MF Series - PDF (334KB)	Dip	1/8 ~ 3 W
Metal Oxide Film Resistors - MOF Series MOF Metal Oxide Film Resistors can sustain high temperatures and electrical overloads, and supports moderate-to-precision attributes. RSS, RSN Series - PDF (325KB)	Dip	1/4 ~ 10 W
Cement Resistors - SQP, SQM, SQT, SQH, SQZ Series Cement Resistors are made by winding resistance wires around non-alkaline ceramic core or metal oxide film rod, which is added with a layer of heat and humidity resistant and non-corrosive protective material. SQP, SQM, SQT, SQH, SQZ Series - PDF (316KB)	Dip	2 ~ 25 W
Carbon Resistors - CF Series CF Series are the earliest and a still popular type made by breaking down hydrocarbon gases at high temperature in a vacuum to form a carbonic deposit on the surface of a cylindrical substrate. CF Series - PDF (289KB)	Dip	1/8 ~ 3 W
Zero Ohm and Jumper Wire - ZO, JW Series Zero Ohm and Jumper Wire Resistors are developed for the interconnection device Between points on a P.C. Board as jumper wires or Crossovers. ZO, JW Series - PDF (339KB)	Dip	1/8 ~ 1/4 W
Thick Film Chip Resistor Series FCR	Chip	1/10 ~ 1/4 W
CDS Photo Resistors - RDM Series	SMD	1/8 ~ 1 W
Chip Array Resistor RCA Series	Chip	1/16 W
Chip Network Resistor RCN Series	Chip	1/2 ~ 1 W
Current Sense / Open Air Power Type - LR Type A Series	Dip	0.5 ~ 1.5 W
Low Value Wire Power Type LRB	Dip	Max. 4.5 A

Correlation

TOKEN Color Code System

Token resistor color coding system applies coating resistors of the axial lead type. This system is employed for resistors when the surface area is not sufficient to print the resistance value for the past time.

PDF (313KB)

Forming Type and Dimensions

Through hole Resistor Forming Types and Dimensions

PDF (233KB)

Glossary

Resistor Glossary Reference Page

PDF (235KB)

Precautions in Use

Precautions of Resistor Usage

PDF (269KB)

China:	12F, Zhongxing Industry Bld., Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China. Tel: +86-755-26055363, 26055364; Fax: +86-755-26055365
Taiwan:	No. 137, Sec. 1, Chung Shin Rd., Wu Ku Hsiang, Taipei Hsien, Taiwan, R.O.C. Tel: +886-2-29810109; Fax: +886-2-29887487