ADJUSTABLE POWER RESISTORS

Ribbon-Wire Adjustable Power Resistors

DQS

Low-cost and high-precision adjustment Removes the need for digital signal conditioning.

Power Adjustable Ribbon-Wire Resistors - DQS Series

Ribwound DQS adjustable resistors are particularly useful where high energy is to be dissipated in the lower ohmic ranges. These heavy-duty resistors are designed to withstand frequent start-stop cycles characteristic of motor starting, dynamic braking and other similar applications.


These power-rib wirewound resistors are equipped with an adjustable lug, making them ideal for adjusting circuits, obtaining odd resistance values and setting equipment to meet various line voltages.


These DQS power-rib resistors feature a hollow core to permit secure fastening with spring-type clips or thru bolts with washers. They also offer the durability vitreous enamel coating and all-welded construction.


Calculate Max. Amperes:

  • Voltage = (Watts × Ohms) 1/2

Resistance Tolerance:

  • K(±10%), J(±5%), H(±3%)

The power DQS Wave-Ribbon Series is lead-free and RoHS compliant. Please contact us for details with your specific needs.

DQS 75W ~ 2000W

DQS Adjustable dq3_1_power_resistor.jpg DQS Adjustable dq3_3_power_resistor.jpg
Wattage
Rating		 Dimensions (mm) Max. Resistance
Value(Ω)
A B C D E F G H I J K L M O
75W 110 25 16 30 8 150 5 18 6 166 58 1.2 6 27 0.1~8Ω
90W 90 28 18 32 8 130 5 19 6 146 60 1.2 6 27 0.1~9Ω
120W 110 28 18 32 8 150 5 19 6 166 60 1.2 6 27 0.1~12Ω
150W 140 28 18 32 8 180 5 19 6 196 60 1.2 6 27 0.1~15Ω
180W 160 28 18 32 8 200 5 19 6 216 60 1.2 6 27 0.1~18Ω
225W 195 28 18 32 8 235 5 19 6 251 60 1.2 6 27 0.1~23Ω
240W 185 35 24 36 10 225 5 19 8 245 76 1.6 6 34 0.1~24Ω
300W 210 35 24 36 10 250 5 19 8 274 76 1.6 6 34 0.3~30Ω
375W 210 40 25 38 12 250 5 20 8 274 78 1.6 6 34 0.3~38Ω
450W 260 40 25 38 12 300 5 20 8 320 78 1.6 6 34 0.3~45Ω
600W 330 40 25 38 12 370 5 20 8 395 78 1.6 6 34 0.3~60Ω
750W 330 50 35 50 12 380 6 25 9 400 100 1.6 8 40 0.3~75Ω
900W 400 50 35 50 12 450 6 25 9 470 100 1.6 8 40 0.3~90Ω
1000W 460 50 35 50 12 510 6 25 9 530 100 1.6 8 40 0.5~100Ω
1200W 460 60 40 55 15 515 6 30 10 535 110 1.6 10 50 0.5~120Ω
1500W 540 60 40 55 15 595 6 30 10 615 110 1.6 10 50 0.5~150Ω
2000W 650 65 42 62 15 702 6 30 10 722 115 1.6 10 50 0.5~200Ω

Specification - DQS Series

Test Item Test Methods Characteristics
Resistance tolerance JIS-C-5202 5-1 Resistance Nominal Tolerance
1≤R 1>R ±5%(J) ±10%(K)
Temperature coefficient JIS-C-5202 5-2 ±400PPM/°C MAX
Load rating JIS-C-5202 5-4 ΔR/R≤ ±(0.5%+0.1Ω) Surface temperature up 350°C MAX
Short-term overload JIS-C-5202 5-5
500% rated wattage 5 seconds 		Free of appearance or structural irregularity ΔR/R≤ ±(2%+0.1Ω)
Insulation resistance JIS-C-5202 5-6 500VDC 100MΩ min
Dielectric withstanding voltage JIS-C-5202 5-7
1000VDC 1 minute Between terminal and anchor stand		 Free of appearance or structural irregularity ΔR/R≤ ±(0.1%+0.05Ω)
Terminal strength JIS-C-5202 6-1 8kg 30 seconds Free of appearance or structural irregularity
Vibration JIS-C-5202 6-3
1.5m/m 10 ~ 50 ~ 10 Hz/min X-Y-Z 2 hours each 		Free of appearance or structural irregularity Surface coating crack ΔR/R≤ ±(1%+0.05Ω)
Thermal shock JIS-C-5202 7-3
Room temp 30 minutes ON-55°C 15 minutes OFF		 Free of structural irregularity ΔR/R≤ ±(1%+0.05Ω)
Humidity JIS-C-5202 7-5
40°C 90%RH 240 hours 		Free of appearance or structural irregularity Surface coating crack ΔR/R≤ ±(3%+0.1Ω)
Load life JIS-C-5202 7-10
90 minutes ON - 30 minutes OFF500 hours		 Free of appearance or structural irregularity Surface coating crack ΔR/R≤ ±(5%+0.1Ω)
Flame retardation JIS-C-5202 7-13-3-2
100% - 600% rated wattage load		 US UL-94 flame retardation test V-0 grade noncombustible
REMARKS: 1. Resistance and resistance tolerance were tested in-house with micro resistance meter.
2. Coating refers to UL-certified data provided by supplier

How to Order - DQS Series

DQS 1500W 10R K G
Product Type
DQS
Rated Wattage
75W~2000W
Max. Resistance Value(Ω)
R5000.500 Ω
1R001 Ω
250R250 Ω
5K005,000 Ω
Resistance Tolerance
H±3%
J±5%
K±10%
Assembly Method
CClip Mount.
GHorizontal Mount.
NNo Mount.
ZVertical Mount.
Remark:

Max. Resistance Value:
Max. resistance value is given to calculate the minimum resistance value because resistance value is proportional to the length of resistive wire wound along the ceramic rod.

Rated Wattage: Power rating at Max. Resistance Value.

Resistance Tolerance: Precision range of Max. Resistance Value..

1. Power Rating of adjustable resistor is determined by the maximum resistance value.
2. Resistance and Power Rating should be decreased while you are moving the adjustable lug.
3. Adjustability is 10% to 90% of full value. Wattage is proportional to this adjusted resistance value.


PDF download

DQS Series - Ribbon-Wire Adjustable Power Resistors

Page: 1 / 2