Chip - tag

81 - 90 of about 93 for Chip.

High frequency non-inductance Melf Resistors

of MELF resistor is more complex than flat-chip resistor, , MELF resistor has its own advantages over flat-chip type. TOKEN full line of high frequency non-inductance MELF RFM resistors meet RoHS ...

 

Ceramic Filters - Token Passive Components

SMD CHIP TYPE LTCA/CV10.7M , Chip , 10.7MHz , SFECV10.7 , TV/VCR STAGE , Description , Type , Frequency Range , Murata (P/N) , LT MB FOR TV/VCR STAGE , Dip , ...

 

Ceramic resonators - Token Passive Components

CHIP TYPE ZTA/ZTT CC/CS/CV MG/MT/MX , Chip , 2.00~50.00 MHz , CSAC/CSTC , (kHz) Description , Type , Frequency Range , Murata(P/N) , ZTB , Dip , 190~1250 ...

SMD Inductors

CM Series - SMD Inductors Wirewound Chip Molded Type , A Brief Introduction to the Product , CM322522 and CM453232 series are revolutionary, high reliable wire wound components for ... SMD Inductors Wirewound Chip Molded Type:(TCCM322522, TCCM453232) ,   , Inductance , R10 (0.10μH) 1R0 (1.00μH) 100 (10.00×100μH) , 101 (10.00×101 ...

SMD Wirewound Inductors

WL Series - SMD Wirewound Inductors Chip Open Type , Features , - Wire wound Ceramic Construction Provide High SRFs. , - Ultra-compact Inductors Provide Exceptional Q Values ... 65293; Miniature SMD Chip Inductor for Fully Automated Assembly. , - Outstanding Endurance from Pull-up Force, Mechanical Shock and Pressure. , - Tighter ...

SMD Wirewound Inductor

WL Series - SMD Wirewound Inductor Chip Open-Type , Standard Electrical Specifications for 0402 Wire Wound Chip Inductors / Standard , PartNumber , Inductance(nH)@ 250MHz , Tolerance(%) , ...

SMD Wirewound Inductors

65293;TCEC serials high reliable wire would chip inductors for communication, equipment, instrument, video & audio have ,     been developed in response to the trend toward higher ...

SMD Wirewound Inductors

65293;TCEM serials high reliable wire would chip inductors for communication, equipment, instrument, video & audio have ,     been developed in response to the trend toward higher ...

SMD EMI Filters Common Mode Choke

65293;Small Chip Inductor with Ferrite Core and Two Line Types Wire wound. , -Highly Effective in Noise Suppression, High Common-mode Impedance at Noise Band ...

SMD EMI Filters Common Mode Choke

Dropping chip by each side and corner. Drop 10 times in total Drop height:100cm Drop weight:125g , Solderability Test , The terminal should at least be 90% covered ...


© 2008 Token China Passive Components. All Rights Reserved.